|
Double Rod Option
Double acting press cylinders may be ordered with the piston rod extending from both ends. This minimizes rod deflection and make it possible to adjust stroke length. When a CP-400 is ordered with double rod, spacers are supplied to facilitate adjustment.
Rod Speed Reduction: To control the downward speed of double-acting presses, place a Mead Dyla-Trol valve in the bottom
cylinder port so that incoming air flows freely and exhausting air is metered. Model MF1-25 is suitable for the control of all presses under most conditions.
Two Hand Control Unit
Models with a “C” suffix are supplied with a two hand anti-tiedown unit. Recessed trigger buttons, located in each end of the compact unit, require the press
operator to use both hands concurrently to operate the press. Models CP-400C and AP-400C include the CSV-102 , which has a built-in power valve. Model AP-600C includes the CSV-101 and a 1¤2² power valve (C5-3). All air logic. No electrical wiring.
Press Speed Boost: Quick Exhaust
Valves increase rod speed by allowing
exhaust air to be dumped right at the cylinder instead of passing back through the directional valve. If speed is to be increased in both directions on double-acting presses, use one QEV in each port. Use model QEV-3 with 1/4 ton presses and model QEV-2B on 3/4 and 1 3/4 ton models.
Available Cylinder Options:
CR = Cushion Rear
IPR = Inter-Piot Rear
MP = Magnetic Piston
|
Model No.
|
Description
|
Parts :
|
Bore
|
Thrust
|
Stroke
|
Table Width & Depth
|
Weight
|
Options
|
|
AP-42M
|
1/4 Ton Arbor Press
|
Press Stand Only
|
2 1/4"
|
477
|
2 (Spr. Ret)
|
3x3
|
9 lbs
|
NA
|
|
AP-42P
|
1/4 Ton Arbor Press
|
Cylinder Mounted on Stand
|
2 1/4"
|
477
|
2 (Spr. Ret)
|
3x3
|
10 lbs
|
NA
|
|
CP-400M
|
3/4 Ton Column Press
|
Press Stand Only
|
4"
|
1508
|
4
|
6 7/8 x 8 3/4
|
90 lbs
|
NR, DR
|
|
CP-400P
|
3/4 Ton Column Press
|
Cylinder Mounted on Stand
|
4"
|
1508
|
4
|
6 7/8 x 8 3/4
|
105 lbs
|
NR, DR
|
|
CP-400C
|
3/4 Ton Column Press
|
Complete Press with 2 Hand Controls (not
piped)
|
4"
|
1508
|
4
|
6 7/8 x 8 3/4
|
105 lbs
|
NR, DR
|
|
AP-400M
|
3/4 Ton Arbor Press
|
Press Stand Only
|
4"
|
1508
|
2 1/2"
|
5x5
|
45 lbs
|
NR, DR
|
|
AP-400P
|
3/4 Ton Arbor Press
|
Cylinder Mounted on Stand
|
4"
|
1508
|
2 1/2"
|
5x5
|
52 lbs
|
NR, DR
|
|
AP-400C
|
3/4 Ton Arbor Press
|
Complete Press with 2 Hand Controls (not
piped)
|
4"
|
1508
|
2 1/2"
|
5x5
|
52 lbs
|
NR, DR
|
|
AP-600M
|
1 3/4 Ton Arbor Press
|
Press Stand Only
|
6"
|
3393
|
4"*
|
8x8
|
85 lbs
|
NR, DR
|
|
AP-600P
|
1 3/4 Ton Arbor Press
|
Cylinder Mounted on Stand
|
6"
|
3393
|
4"*
|
8x8
|
120 lbs
|
NR, DR
|
|
AP-600C
|
1 3/4 Ton Arbor Press
|
Complete Press with 2 Hand Controls (not
piped)
|
6"
|
3393
|
4"*
|
8x8
|
120 lbs
|
NR, DR
|
|
AP-122
|
Single Acting - 3/4 Ton Arbor Press
|
Cylinder Mounted on Stand
|
4"
|
1508
|
2 1/2"*
|
5x5
|
52 lbs
|
NR, DR
|
|
AP-283
|
Single Acting - 1 3/4 Ton Arbor Press
|
Cylinder Mounted on Stand
|
6"
|
3393
|
4"*
|
8x8
|
120 lbs
|
NR, DR
|
Note:Standard column for Column Press is 14" long. Longer column (18" max) is available on request.
*Additional Stroke available to 4" (AP-400) and 6" (AP-600) on request.
|
