Large Bore Cylinders For Abusive Conditions
Combining NFPA dimensional interchangeability and high quality components, the HD1 Large Bore Series offers excellent performance and long service life, even in the most severe of conditions. Mead offers 5-in., 8-in., 10-in. and 12-in. bore sizes to meet your needs.
| Bore Diameter (in.) |
Thrust* |
Thrust Multiplier** |
Rod Diameter (in.) |
Max Operating Air |
Pressure Oil † |
| 5 |
1964 |
19.64 |
1 or 1 3/8 |
250 |
900 |
| 8 |
5027 |
50.27 |
1 3⁄8 or 1 3⁄4 |
200 |
500 |
| 10 |
7854 |
78.54 |
1 3⁄4 or 2 |
200 |
400 |
| 12 |
11310 |
113.1 |
2 or 2 1⁄2 |
200 |
400 |
* Pushing force of cylinder at 100 PSI inlet pressure. Pulling force
will be about 10% less due to the displacement of the piston rod. (Use
15% when Oversized Rods are chosen) Note: Actual realizable thrust could
be somewhat lower due to side loading and internal friction. It is best
to oversize you cylinder by about 25% to assure smooth operation.
** To
determine cylinder thrust at other inlet pressures, multiply this factor
times the desired inlet pressure.
†HD1 Cylinders are not rate or approved
for use in a hydraulic circuit where an impulse or pressure spike may
occur.
Large Bore Cylinder Construction
Rod Bearing:
Easily removable, held in place by socket head screws to assure easy replaceability
without taking entire cylinder apart
Heads:
Precision broached steel blocks
Tubes:
Aluminum hard anodized to 60 Rc (16 RMS finish)
Piston:
Solid high alloy aluminum
Piston Rod:
100,000 PSI minimum yield steel, ground and polished hard chrome plated steel
Piston and Rod Seals:
Wear compensating Buna N vee rings.
Tube Seals:
Buna N o-rings
Rod Wiper
Dupont Teflon®
Tie Rods:
Alloy steel for maximum strength.
Finish:
Black Paint
|
